Wheel Loaders

HomeIndustriesWheel LoadersModel Information

910M Compact Wheel Loader

Overview
Specifications
Equipment

Product Description

910M Compact Wheel Loader

Product Specifications

UnitsUSMetric

 

Engine
Net Power
97 HP 72 kW
Engine Model
Cat C4.4 ACERT�
Maximum Gross Power - ISO 14396
100 HP 74 kW
Maximum Gross Power - ISO 14396 (DIN)
101 HP 74 kW
Maximum Gross Power - Maximum Engine Speed
2350 r/min 2350 r/min
Maximum Gross Power - SAE J1995
102 HP 76 kW
Rated Net Power - Rated Engine Speed
2200 r/min 2200 r/min
Rated Net Power - SAE J1349
96 HP 72 kW
Weights
Operating Weight
17893 lb 8116 kg
Service Refill Capacities
Cooling System
5.7 gal (US) 21.5 l
Fuel Tank
40.7 gal (US) 154 l
Engine Crankcase
2.3 gal (US) 8.8 l
Hydraulic System - Including Tank
25.9 gal (US) 98 l
Operating Specifications
Rated Bucket Capacity
2.5 yd³ 1.9 m³
Engine
Maximum Gross Power
100 HP 74 kW
Buckets
Bucket Capacities
1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating �11 degrees; Locking differential (Standard)
Cab
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Engine
Bore
4.13 in 105 mm
Displacement
268 in³ 4.4 l
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396
332 ft·lbf 450 N·m
Maximum Gross Torque - SAE J1995
336 ft·lbf 455 N·m
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - ISO 9249
97 HP 72 kW
Rated Net Power - ISO 9249 (DIN)
98 HP 72 kW
Stroke
5 in 127 mm
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - ISO 9249
329 ft·lbf 446 N·m
Maximum Net Torque - SAE J1349
325 ft·lbf 441 N·m
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s 1.4 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s 3.7 s
Hydraulic Cycle Time - Rackback
2.2 s 2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s 5.2 s
Hydraulic Cycle Time - Total Cycle Time
12.5 s 12.5 s
Maximum Flow - Implement Pump
32 gal/min 122 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gal/min 90 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min 90 l/min
Maximum Working Pressure - Implement Pump
3408 psi 23500 kPa
Relief Pressure - Tilt Cylinder
4931 psi 34000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi 21000 kPa
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi 21000 kPa
Service Refill Capacities
Axles - Front Center Differential
2 gal (US) 7.5 l
Axles - Rear Center Differential
2 gal (US) 7.5 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) 18.9 l
Hydraulic Tank
14.5 gal (US) 55 l
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
0.9 gal (US) 3.4 l
Steering
Maximum Flow - Steering Pump
17 gal/min 66 l/min
Maximum Working Pressure - Steering Pump
2683 psi 18500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns 3.75 turns
Steering Articulation Angle - Each Direction
40 ° 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s 3.2 s
Tires
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include
15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Standard Size
15.5-25 12PR
Transmission
Forward and Reverse - High Range
25 mile/h 40 km/h
Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h 10 km/h
Forward and Reverse - Low Range, Speed Range 2*
12.5 mile/h 20 km/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Units:USMetric

Used Equipment Rent Equipment

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549