Wheel Loaders

HomeIndustriesWheel LoadersModel Information

930M Small Wheel Loader

Overview
Specifications
Equipment

Product Description

The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Product Specifications

UnitsUSMetric

 

Engine
Engine Model
Cat® C7.1
Maximum Rated Gross Power - ISO 14396
164 HP 122 kW
Maximum Rated Gross Power - ISO 14396 (DIN)
166 HP 122 kW
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
166 HP 122 kW
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
164 HP 122 kW
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min 1800 r/min
Rated Net Power
157 HP 117 kW
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
160 HP 119 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
157 HP 117 kW
Buckets
Bucket Capacities
2.5-2.7 m3 (3.3-3.5 yd3)
Weights
Operating Weight
31144 lb 14131 kg
Engine
Maximum Gross Power
164 HP 122 kW
Bore
4 in 105 mm
Stroke
5 in 135 mm
Displacement
427 in³ 7.01 l
Cab
ROPS
ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (1)
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Note (2)
The Blue Angel environmental label is an optional attachment for Europe only.
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
592 ft·lbf 804 N·m
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592 ft·lbf 804 N·m
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
572 ft·lbf 776 N·m
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
572 ft·lbf 776 N·m
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
566 ft·lbf 768 N·m
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
566 ft·lbf 768 N·m
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162 HP 119 kW
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP 119 kW
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min 1600 r/min
Note (1)
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4)
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP 116 kW
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 HP 116 kW
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
154 HP 115 kW
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
162 HP 119 kW
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Lift Cylinder, Double Acting - Bore Diameter
4.7 in 120 mm
Lift Cylinder, Double Acting - Rod Diameter
2.6 in 65 mm
Lift Cylinder, Double Acting - Stroke
28.7 in 728 mm
Maximum Flow - Implement Pump
50 gal/min 190 l/min
Maximum Flow - Implement Pump - 3rd Function*
50 gal/min 190 l/min
Maximum Working Pressure - Implement Pump
3626 psi 25000 kPa
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Note (3)
* 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Relief Pressure - Tilt Cylinder
4061 psi 28000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3626 psi 25000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
4061 psi 28000 kPa
Tilt Cylinder, Double Acting - Bore Diameter
5.9 in 150 mm
Tilt Cylinder, Double Acting - Rod Diameter
3.5 in 90 mm
Tilt Cylinder, Double Acting - Stroke
21.9 in 555 mm
Operating Specifications
Full Turn Tip Load
19563 lb 8876 kg
Power Train
Brakes - Parking
Spring applied hydraulically released
Brakes - Service
Inboard wet disc
Front Axle
Fixed
Front Axle - Traction Aid**
Locking differential (standard)
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2)
Offset rims available to meet European roading requirements.
Note (3)
**Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear Axle
Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Rear Axle - Traction Aid - Optional
Limited slip differential
Service Refill Capacities
Cooling System
7.9 gal (US) 30 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) 19 l
Engine Crankcase
5.3 gal (US) 20 l
Front Axles
6.9 gal (US) 26 l
Fuel Tank
51.5 gal (US) 195 l
Hydraulic System - Including Tank
43.6 gal (US) 165 l
Hydraulic Tank
23.8 gal (US) 90 l
Rear Axles
6.6 gal (US) 25 l
Transmission - Gear Box
2.2 gal (US) 8.5 l
Steering
Maximum Flow - Steering Pump
34 gal/min 130 l/min
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf 50375 N·m
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf 37620 N·m
Maximum Working Pressure - Steering Pump
3500 psi 24130 kPa
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s 2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s 2.8 s
Steering Cylinder, Double Acting - Bore Diameter
2.8 in 70 mm
Steering Cylinder, Double Acting - Rod Diameter
1.6 in 40 mm
Steering Cylinder, Double Acting - Stroke
17.2 in 438 mm
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h 13 km/h
Forward and Reverse - Range 3
17 mile/h 27 km/h
Forward and Reverse - Range 4
25 mile/h 40 km/h
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Units:USMetric
Standard Equipment
POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT
Optional Equipment
Cab, deluxe (standard in Europe):
Cold start package:
Guards
Radio packages:
Seats:
Steering:
Tires:

Used Equipment Rent Equipment

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549