Wheel Loaders

HomeIndustriesWheel LoadersModel Information

950M Wheel Loader | Front Loader | Tier 4

Overview
Specifications
Equipment

Product Description

The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine delivers the reliability, durability, and versatility you’ve come to expect from a Cat machine.

Product Specifications

UnitsUSMetric

 

Engine
Emissions
Tier 4/Stage IV
Engine - Tier 4 Final/Stage IV
Emissions
Tier 4/Stage IV
Weights
Operating Weight
42357 lb 19213 kg
Buckets
Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)
Bucket Capacities
Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)
Dimensions
Centerline of Rear Axle to Edge of Counterweight
76 in 1942 mm
Centerline of Rear Axle to Hitch
66 in 1675 mm
Ground Clearance
14 in 367 mm
Height - Top of Exhaust Pipe
90 in 3413 mm
Height - Top of Hood
106 in 2697 mm
Height - Top of ROPS
92 in 3451 mm
Hinge Pin Height at Carry Height
25 in 647 mm
Hinge Pin Height at Maximum Lift
159 in 4027 mm
Maximum Width over Tires (loaded)
111 in 2822 mm
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length (without bucket)
272 in 6906 mm
Tread Width
84 in 2140 mm
Wheel Base
132 in 3350 mm
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
6.33 ft 1942 mm
Centerline of Rear Axle to Hitch
5.5 ft 1675 mm
Ground Clearance
1.17 ft 367 mm
Height - Top of Exhaust Pipe
11.17 ft 3413 mm
Height - Top of Hood
8.83 ft 2697 mm
Height - Top of ROPS
11.33 ft 3451 mm
Hinge Pin Height at Carry Height
2.58 ft 782 mm
Hinge Pin Height at Maximum Lift
14.83 ft 4527 mm
Lift Arm Clearance at Maximum Lift
11.92 ft 3634 mm
Maximum Width - Over Tires - Loaded
9.25 ft 2822 mm
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket
24.58 ft 7488 mm
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
40 degrees
Tread Width
7 ft 2140 mm
Wheel Base
11 ft 3350 mm
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
6.33 ft 1942 mm
Centerline of Rear Axle to Hitch
5.5 ft 1675 mm
Ground Clearance
1.17 ft 367 mm
Height - Top of Exhaust Pipe
11.17 ft 3413 mm
Height - Top of Hood
8.83 ft 2697 mm
Height - Top of ROPS
11.33 ft 3451 mm
Hinge Pin Height at Carry Height
2.08 ft 647 mm
Hinge Pin Height at Maximum Lift
13.25 ft 4027 mm
Lift Arm Clearance at Maximum Lift
10.75 ft 3280 mm
Maximum Width - Over Tires - Loaded
9.25 ft 2822 mm
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket
22.67 ft 6906 mm
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
36 degrees
Tread Width
7 ft 2140 mm
Wheel Base
11 ft 3350 mm
Engine
Displacement
428 in³ 7.01 l
Engine Model
Cat C7.1 ACERT
Maximum Net Power - 2,100 rpm - ISO 9249
230 HP 171 kW
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
232 HP 171 kW
Maximum Net Power - 2,100 rpm - SAE J1349
230 HP 171 kW
Maximum Net Torque - 1,300 rpm
858 ft·lbf 1163 N·m
Maximum Power - 2,100 rpm - ISO 14396
249 HP 186 kW
Maximum Power - 2,100 rpm - ISO 14396 - Metric
253 HP 186 kW
Maximum Power - 2,100 rpm - SAE J1995
250 HP 187 kW
Net Power - ISO 9249
230 HP 171 kW
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Peak Gross Torque - 1,300 rpm - ISO 14396
908 ft·lbf 1231 N·m
Peak Gross Torque - 1,300 rpm - SAE J1995
911 ft·lbf 1235 N·m
Hydraulic System
Hydraulic Cycle Time - Total
8.9 s 8.9 s
Implement Pump Type
Variable Axial Piston
Implement System - Maximum Operating Pressure
4250 psi 29300 kPa
Implement System - Maximum Pump Output at 2,150 rpm
76 gal/min 286 l/min
Operating Specifications
Breakout Force
40690 lbf 181 kN
Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection
25926 lb 11760 kg
Static Tipping Load - Full 40° Turn - With Tire Deflection
24262 lb 11005 kg
Service Refill Capacities
Cooling System
15.6 gal (US) 59 l
Crankcase
5.8 gal (US) 22 l
DEF Tank
4.2 gal (US) 16 l
Differential - Final Drives - Front
11.4 gal (US) 43 l
Differential - Final Drives - Rear
11.4 gal (US) 43 l
Fuel Tank
72.6 gal (US) 275 l
Hydraulic Tank
33 gal (US) 125 l
Transmission
11.4 gal (US) 43 l
Sound
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
104 LWA***
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
69 dB(A) 69 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107 dB(A) 107 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A) 70 dB(A)
Transmission
Forward - 1
4.3 mile/h 6.9 km/h
Forward - 2
7.5 mile/h 12 km/h
Forward - 3
12 mile/h 19.3 km/h
Forward - 4
16 mile/h 25.7 km/h
Forward - 5
24.5 mile/h 39.5 km/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Reverse - 1
4.3 mile/h 6.9 km/h
Reverse - 2
7.5 mile/h 12 km/h
Reverse - 3
16 mile/h 25.7 km/h
Weights
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 (4.1 yd3) general purpose bucket with BOCE.
Units:USMetric
Standard Equipment
POWER TRAIN
OPERATOR ENVIRONMENT
COMPUTERIZED MONITORING SYSTEM
ELECTRICAL AND LIGHTING
CAT CONNECT TECHNOLOGIES
LINKAGE
HYDRAULICS
FLUIDS
OTHER STANDARD EQUIPMENT
Optional Equipment
POWER TRAIN
OPERATOR ENVIRONMENT
ELECTRICAL AND LIGHTING
STARTERS, BATTERIES, AND ALTERNATORS
CAT CONNECT TECHNOLOGIES
WORK TOOLS
HYDRAULICS
FLUIDS
OTHER OPTIONAL EQUIPMENT

Used Equipment Rent Equipment

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549