Wheel Loaders

HomeIndustriesWheel LoadersModel Information

962M Wheel Loader | Front Loader | Tier 4

Overview
Specifications
Equipment

Product Description

The 962M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine delivers the reliability, durability, and versatility you’ve come to expect from a Cat machine.

Product Specifications

UnitsUSMetric

 

Engine - Tier 4 Final/Stage IV
Emissions
Tier 4/Stage IV
Weights
Operating Weight
44591 lb 20226 kg
Buckets
Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)
Bucket Capacities
Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)
Dimensions
Centerline of Rear Axle to Edge of Counterweight
85 in 2147 mm
Centerline of Rear Axle to Hitch
66 in 1675 mm
Ground Clearance
14 in 364 mm
Height - Top of Exhaust Pipe
134 in 3411 mm
Height - Top of Hood
106 in 2694 mm
Height - Top of ROPS
136 in 3447 mm
Hinge Pin Height at Carry Height
26 in 669 mm
Hinge Pin Height at Maximum Lift
167 in 4235 mm
Lift Arm Clearance at Maximum Lift
136 in 3477 mm
Maximum Width over Tires (loaded)
111 in 2824 mm
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length (without bucket)
285 in 7228 mm
Tread Width
84 in 2140 mm
Wheel Base
132 in 3350 mm
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
7.08 ft 2147 mm
Centerline of Rear Axle to Hitch
5.5 ft 1675 mm
Ground Clearance
1.17 ft 361 mm
Height - Top of Exhaust Pipe
11.17 ft 3408 mm
Height - Top of Hood
8.83 ft 2691 mm
Height - Top of ROPS
11.33 ft 3444 mm
Hinge Pin Height at Carry Height
2.58 ft 779 mm
Hinge Pin Height at Maximum Lift
14.83 ft 4524 mm
Lift Arm Clearance at Maximum Lift
11.83 ft 3631 mm
Maximum Width - Over Tires - Loaded
9.25 ft 2824 mm
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket
23.75 ft 7228 mm
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
37 degrees
Tread Width
7 ft 2140 mm
Wheel Base
11 ft 3350 mm
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
7.08 ft 2147 mm
Centerline of Rear Axle to Hitch
5.5 ft 1675 mm
Ground Clearance
1.17 ft 364 mm
Height - Top of Exhaust Pipe
11.17 ft 3411 mm
Height - Top of Hood
8.83 ft 2694 mm
Height - Top of ROPS
11.33 ft 3447 mm
Hinge Pin Height at Carry Height
2.17 ft 669 mm
Hinge Pin Height at Maximum Lift
13.92 ft 4235 mm
Lift Arm Clearance at Maximum Lift
11.33 ft 3477 mm
Maximum Width - Over Tires - Loaded
9.25 ft 2824 mm
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket
23.75 ft 7228 mm
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
37 degrees
Tread Width
7 ft 2140 mm
Wheel Base
11 ft 3350 mm
Engine
Displacement
428 in³ 7 l
Engine Model
Cat C7.1 ACERT
Maximum Net Power - 2,100 rpm - ISO 9249
250 HP 186 kW
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
253 HP 186 kW
Maximum Net Power - 2,100 rpm - SAE J1349
250 HP 186 kW
Maximum Net Torque - 1,350 rpm
865 ft·lbf 1172 N·m
Maximum Power - 2,100 rpm - ISO 14396
269 HP 201 kW
Maximum Power - 2,100 rpm - ISO 14396 - Metric
273 HP 201 kW
Maximum Power - 2,100 rpm - SAE J1995
271 HP 202 kW
Net Power - ISO 9249
250 HP 186 kW
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Peak Gross Torque - 1,350 rpm - ISO 14396
918 ft·lbf 1245 N·m
Peak Gross Torque - 1,350 rpm - SAE J1995
921 ft·lbf 1249 N·m
Hydraulic System
Hydraulic Cycle Time - Total
8.9 s 8.9 s
Implement Pump Type
Variable Axial Piston
Implement System - Maximum Operating Pressure
4250 psi 29300 kPa
Implement System - Maximum Pump Output at 2,150 rpm
76 gal/min 286 l/min
Operating Specifications
Breakout Force
42489 lbf 189 kN
Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection
27494 lb 12471 kg
Static Tipping Load - Full 40° Turn - With Tire Deflection
25814 lb 11709 kg
Service Refill Capacities
Cooling System
15.6 gal (US) 59 l
Crankcase
5.8 gal (US) 22 l
DEF Tank
4.2 gal (US) 16 l
Differential - Final Drives - Front
11.4 gal (US) 43 l
Differential - Final Drives - Rear
11.4 gal (US) 43 l
Fuel Tank
72.6 gal (US) 275 l
Hydraulic Tank
33 gal (US) 125 l
Transmission
11.4 gal (US) 43 l
Sound
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
104 LWA***
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
69 dB(A) 69 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107 dB(A) 107 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A) 70 dB(A)
Transmission
Forward - 1
4.3 mile/h 6.9 km/h
Forward - 2
7.5 mile/h 12 km/h
Forward - 3
12 mile/h 19.3 km/h
Forward - 4
16 mile/h 25.7 km/h
Forward - 5
24.5 mile/h 39.5 km/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Reverse - 1
4.3 mile/h 6.9 km/h
Reverse - 2
7.5 mile/h 12 km/h
Reverse - 3
16 mile/h 25.7 km/h
Weights
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.3 m3 (4.3 yd3) general purpose bucket with BOCE.
Units:USMetric
Standard Equipment
POWER TRAIN
OPERATOR ENVIRONMENT
COMPUTER MONITORING SYSTEM
ELECTRICAL AND LIGHTING
CAT CONNECT TECHNOLOGIES
LINKAGE
HYDRAULICS
FLUIDS
OTHER STANDARD EQUIPMENT
Optional Equipment
POWER TRAIN
OPERATOR ENVIRONMENT
ELECTRICAL AND LIGHTING
STARTERS, BATTERIES, AND ALTERNATORS
CAT CONNECT TECHNOLOGIES
LINKAGE
WORK TOOLS
HYDRAULICS
FLUIDS
OTHER OPTIONAL EQUIPMENT

Used Equipment Rent Equipment

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549