Wheel Loaders

HomeIndustriesWheel LoadersModel Information

930M Waste Handler Small Wheel Loader

Overview
Specifications
Equipment

Product Description

The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Product Specifications

UnitsUSMetric

 

Engine
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
160 HP 119 kW
Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4)
1800 r/min 1800 r/min
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4)
166 HP 122 kW
Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4)
164 HP 122 kW
Maximum Rated Gross Power - ISO 14396 (DIN)
166 HP 122 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
157 HP 117 kW
Engine Model
Cat® C7.1
Maximum Rated Gross Power - ISO 14396
164 HP 122 kW
Buckets
Bucket Capacities
3.0-5.0 m3 (3.9-6.5 yd3)
Weights
Operating Weight
33396 lb 15153 kg
Engine
Maximum Gross Power
170 HP 127 kW
Bore
4 in 105 mm
Stroke
5 in 135 mm
Displacement
427 in³ 7.01 l
Cab
ROPS
ISO 3471: 2008
FOPS
ISO 3449: 2005 LEVEL II
Loader Hydraulic System
Maximum Flow - Implement Pump
50 gal/min 190 l/min
Steering
Steering Cylinder, Double Acting - Bore Diameter
2.8 in 70 mm
Service Refill Capacities
Cooling System
7.9 gal (US) 30 l
Engine Crankcase
5.3 gal (US) 20 l
Engine
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
154 HP 115 kW
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min 1600 r/min
Loader Hydraulic System
Maximum Working Pressure - Implement Pump
3626 psi 25000 kPa
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
4061 psi 28000 kPa
Lift Cylinder, Double Acting - Stroke
28.7 in 728 mm
Cab
Note (1)
*Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
162 HP 119 kW
Transmission
Forward and Reverse - Range 4
25 mile/h 40 km/h
Cab
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A) 68 dB(A)
Service Refill Capacities
Hydraulic Tank
23.8 gal (US) 90 l
Engine
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Service Refill Capacities
Front Axles
6.9 gal (US) 26 l
Transmission - Gear Box
2.2 gal (US) 8.5 l
Steering
Steering Cylinder, Double Acting - Rod Diameter
1.6 in 40 mm
Power Train
Front Axle - Traction Aid*
Locking differential (standard)
Engine
Note (4)
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Service Refill Capacities
Rear Axles
6.6 gal (US) 25 l
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4061 psi 28000 kPa
Steering
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf 50375 N·m
Loader Hydraulic System
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Lift Cylinder, Double Acting - Rod Diameter
2.6 in 65 mm
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4)
572 ft·lbf 776 N·m
Operating Specifications
Full Turn Tip Load
18163 lb 8241 kg
Transmission
Forward and Reverse - Range 3
17 mile/h 27 km/h
Steering
Steering Cylinder, Double Acting - Stroke
17.2 in 438 mm
Service Refill Capacities
Fuel Tank
51.5 gal (US) 195 l
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Cab
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A) 101 dB(A)
Steering
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s 2.4 s
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Steering
Maximum Working Pressure - Steering Pump
3500 psi 24130 kPa
Engine
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592 ft·lbf 804 N·m
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s 2.8 s
Loader Hydraulic System
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Maximum Flow - Implement Pump - 3rd Function*
50 gal/min 190 l/min
Engine
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
566 ft·lbf 768 N·m
Loader Hydraulic System
Lift Cylinder, Double Acting - Bore Diameter
4.7 in 120 mm
Power Train
Note (3)
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter
5.9 in 150 mm
Engine
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP 119 kW
Power Train
Note (2)
Offset rims available to meet European roading requirements.
Engine
Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4)
592 ft·lbf 804 N·m
Loader Hydraulic System
Note (3)
*3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
Steering
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf 37620 N·m
Power Train
Rear Axle
Oscillating
Transmission
Forward and Reverse - Range 2
8 mile/h 13 km/h
Loader Hydraulic System
Tilt Cylinder, Double Acting - Rod Diameter
3.5 in 90 mm
Steering
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162 HP 119 kW
Transmission
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP 116 kW
Power Train
Front Axle
Fixed
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 HP 116 kW
Loader Hydraulic System
Tilt Cylinder, Double Acting - Stroke
21.9 in 555 mm
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Cab
Note (2)
The Blue Angel environmental label is an optional attachment for Europe only.
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
566 ft·lbf 768 N·m
Power Train
Brakes - Parking
Spring applied hydraulically released
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
572 ft·lbf 776 N·m
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3626 psi 25000 kPa
Engine
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Power Train
Rear Axle - Traction Aid - Optional
Limited slip differential
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) 19 l
Steering
Maximum Flow - Steering Pump
34 gal/min 130 l/min
Service Refill Capacities
Hydraulic System - Including Tank
43.6 gal (US) 165 l
Engine
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Power Train
Brakes - Service
Inboard wet disc
Units:USMetric
Standard Equipment
POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT
EU STANDARD EQUIPMENT
Optional Equipment
OPTIONS

Used Equipment Rent Equipment

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549