Electric Power

CTSM and CTGM Series Manual Transfer Switches

Overview
Specifications
Equipment

Product Description

Some emergency power installations require multiple automatic transfer switches, each feeding a specific load. In many installations where noncritical loads are being served, specifications may call for manual or non-automatic transfer switches. This method is used because operating personnel are present and the loads are not of a critical nature requiring unattended automatic operation.
Because of the less critical function of this equipment, no specific industry requirements have been established. As a result, devices such as double throw disconnect switches have been used. Since the non-automatic transfer switches are part of the emergency power supply system, they should have the same UL 1008 electrical ratings as the automatic transfer switches feeding the more critical loads. In the event of a short circuit, the non-automatic transfer switches must have the same withstand current ratings as the automatic transfer switches and they must be as rugged and dependable.

Product Specifications

UnitsUSMetric

 

Technical Summary
Rating Range
40-4000A
Transfer Type
Open / Manual
Switch Type
Contactor Based
Units:USMetric
Standard Equipment
Standard Accessories

Used Equipment Rent Equipment

Compare Related Models (Select up to 2)

You may not select more than 2 models. Please remove a selection before adding another.

Compare Products

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549